Πρόβλημα με εγκατασταση mageia σε laptop

Απάντηση
Άβαταρ μέλους
airmaik
Δημοσιεύσεις: 636
Εγγραφή: Τρί Ιουν 07, 2011 16:44 pm

Πρόβλημα με εγκατασταση mageia σε laptop

Δημοσίευση από airmaik » Κυρ Ιαν 05, 2014 20:46 pm

δοκίμασα την mageia4 στο καινούργιο laptop που πήρα και στο live δεν μπορώ να μπω στο internet ενω βλέπει κανονικά το δίκτυο

δίνω

Κώδικας: Επιλογή όλων

lspcidrake -v | grep -i net

Κώδικας: Επιλογή όλων

alx             : Qualcomm Atheros|AR8161 Gigabit Ethernet [NETWORK_ETHERNET] (vendor:1969 device:1091 subv:1043 subd:14c7) (rev: 10)
rt2800pci       : Ralink corp.|RT5390 Wireless 802.11n 1T/1R PCIe [NETWORK_OTHER] (vendor:1814 device:5390 subv:105b subd:e054)

Κώδικας: Επιλογή όλων

ps -ef | grep -v grep | grep -ie net -e wpa

Κώδικας: Επιλογή όλων

root        24     2  0 20:20 ?        00:00:00 [netns]
root      1101     1  0 20:21 ?        00:00:00 /usr/sbin/NetworkManager --no-daemon
live      2783  2492  0 20:22 ?        00:00:04 /usr/bin/perl /usr/bin/net_applet
root      3094     1  0 20:23 ?        00:00:00 /usr/sbin/wpa_supplicant -u -f /var/log/wpa_supplicant.log -c /etc/wpa_supplicant.conf -P /run/wpa_supplicant.pid
root      4987     1  0 20:28 ?        00:00:00 /usr/sbin/wpa_supplicant -B -i wlp2s0 -c /etc/wpa_supplicant.conf -D wext
τις εντολες τις βρήκα στο αγγλικο forum δεν ξερω αν βοηθάνε
Mageia6 x86_64 Lxqt
Intel Core i5-3570 CPU @ 3.40GHz ‖ RAM 7892 MiB ‖ ASRock Z77 Extreme4-M
nVidia GK104 [GeForce GTX 760] [10de:1187] {nvidia}
eth0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)

Άβαταρ μέλους
dglent
Δημοσιεύσεις: 925
Εγγραφή: Τετ Ιουν 01, 2011 05:42 am
Τοποθεσία: Γαλλία

Re: Πρόβλημα με εγκατασταση mageia σε laptop

Δημοσίευση από dglent » Κυρ Ιαν 05, 2014 21:09 pm

Η mageia 3 δουλεύει σωστά; γιατι η 4 έιναι υπό ανάπτυξη ακομα.
Αφου προσπαθήσεις να συνδεθείς, δες αν υπαρχει καποια χρησιμη πληροφορία στο τέλος της εξόδου της εντολής dmesg σχετικά με το wifi
με Ethernet μπορεις να συνδεθεις ;

Άβαταρ μέλους
airmaik
Δημοσιεύσεις: 636
Εγγραφή: Τρί Ιουν 07, 2011 16:44 pm

Re: Πρόβλημα με εγκατασταση mageia σε laptop

Δημοσίευση από airmaik » Κυρ Ιαν 05, 2014 21:24 pm

είχα δοκιμάσει πριν κανένα 10ημερο και νομίζω πως ούτε στην mageia3 δεν έπαιζε
με ethernet δουλευει κανονικα

αυτο δίνει

Κώδικας: Επιλογή όλων

[    0.002181] CPU0: Thermal monitoring enabled (TM1)
[    0.002190] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
[    0.002315] Freeing SMP alternatives memory: 24K (ffffffff81e0e000 - ffffffff81e14000)
[    0.003741] ACPI: Core revision 20130725
[    0.012922] ACPI: All ACPI Tables successfully acquired
[    0.013873] ftrace: allocating 23487 entries in 92 pages
[    0.026430] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.036429] smpboot: CPU0: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz (fam: 06, model: 2a, stepping: 07)
[    0.036437] TSC deadline timer enabled
[    0.036447] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[    0.036455] ... version:                3
[    0.036457] ... bit width:              48
[    0.036458] ... generic registers:      4
[    0.036459] ... value mask:             0000ffffffffffff
[    0.036460] ... max period:             0000ffffffffffff
[    0.036461] ... fixed-purpose events:   3
[    0.036462] ... event mask:             000000070000000f
[    0.037690] smpboot: Booting Node   0, Processors  #   1 #   2 #   3 OK
[    0.077430] Brought up 4 CPUs
[    0.077434] smpboot: Total of 4 processors activated (18357.96 BogoMIPS)
[    0.080786] devtmpfs: initialized
[    0.083473] PM: Registering ACPI NVS region [mem 0xd9771000-0xd9d71fff] (6295552 bytes)
[    0.083568] PM: Registering ACPI NVS region [mem 0xda62d000-0xda8acfff] (2621440 bytes)
[    0.083606] PM: Registering ACPI NVS region [mem 0xda8b3000-0xda8f5fff] (274432 bytes)
[    0.084404] xor: automatically using best checksumming function:
[    0.093568]    avx       : 16184.000 MB/sec
[    0.093570] pinctrl core: initialized pinctrl subsystem
[    0.093608] RTC time: 19:13:10, date: 01/05/14
[    0.093640] NET: Registered protocol family 16
[    0.093722] cpuidle: using governor ladder
[    0.093723] cpuidle: using governor menu
[    0.093759] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.093761] ACPI: bus type PCI registered
[    0.093763] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.093807] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.093810] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.112154] PCI: Using configuration type 1 for base access
[    0.112770] bio: create slab <bio-0> at 0
[    0.129591] raid6: sse2x1    6132 MB/s
[    0.146601] raid6: sse2x2    7710 MB/s
[    0.163607] raid6: sse2x4    8902 MB/s
[    0.163609] raid6: using algorithm sse2x4 (8902 MB/s)
[    0.163610] raid6: using ssse3x2 recovery algorithm
[    0.163652] ACPI: Added _OSI(Module Device)
[    0.163654] ACPI: Added _OSI(Processor Device)
[    0.163656] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.163657] ACPI: Added _OSI(Processor Aggregator Device)
[    0.165718] ACPI: EC: EC description table is found, configuring boot EC
[    0.167819] ACPI: Executed 1 blocks of module-level executable AML code
[    0.175862] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.176241] ACPI: SSDT 00000000da5da018 00853 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.176753] ACPI: Dynamic OEM Table Load:
[    0.176755] ACPI: SSDT           (null) 00853 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.180959] ACPI: SSDT 00000000da5dba98 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.181496] ACPI: Dynamic OEM Table Load:
[    0.181498] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.184839] ACPI: SSDT 00000000da5dcc18 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.185340] ACPI: Dynamic OEM Table Load:
[    0.185341] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.188342] ACPI: Interpreter enabled
[    0.188349] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
[    0.188354] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
[    0.188368] ACPI: (supports S0 S3 S4 S5)
[    0.188370] ACPI: Using IOAPIC for interrupt routing
[    0.188393] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.188544] ACPI: No dock devices found.
[    0.199446] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.852634] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[    0.852849] acpi PNP0A08:00: ACPI _OSC control (0x18) granted
[    0.853303] ACPI: \_SB_.PCI0.TPMX: can't evaluate _ADR (0x5)
[    0.853454] ACPI: \_SB_.PCI0.PDRC: can't evaluate _ADR (0x5)
[    0.853456] ACPI: \_SB_.PCI0.AC0_: can't evaluate _ADR (0x5)
[    0.853458] ACPI: \_SB_.PCI0.BAT0: can't evaluate _ADR (0x5)
[    0.853459] ACPI: \_SB_.PCI0.RESC: can't evaluate _ADR (0x5)
[    0.853461] PCI host bridge to bus 0000:00
[    0.853463] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.853465] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.853467] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.853469] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.853471] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.853472] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.853474] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.853476] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.853477] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    0.853479] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    0.853481] pci_bus 0000:00: root bus resource [mem 0xdfe00000-0xfeafffff]
[    0.853489] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.853586] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[    0.853598] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[    0.853604] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.853609] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.853717] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.853741] pci 0000:00:14.0: reg 0x10: [mem 0xf7e00000-0xf7e0ffff 64bit]
[    0.853814] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.853868] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.853903] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.853927] pci 0000:00:16.0: reg 0x10: [mem 0xf7e1a000-0xf7e1a00f 64bit]
[    0.854006] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.854099] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.854122] pci 0000:00:1a.0: reg 0x10: [mem 0xf7e18000-0xf7e183ff]
[    0.854214] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.854271] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.854305] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.854322] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e10000-0xf7e13fff 64bit]
[    0.854392] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.854446] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.854475] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.854558] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.854615] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.854645] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    0.854725] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.854808] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
[    0.854888] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.854945] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.854983] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.855006] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e17000-0xf7e173ff]
[    0.855098] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.855152] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.855183] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[    0.855363] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.855382] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.855391] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.855399] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.855408] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.855416] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.855425] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e16000-0xf7e167ff]
[    0.855470] pci 0000:00:1f.2: PME# supported from D3hot
[    0.855545] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.855567] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e15000-0xf7e150ff 64bit]
[    0.855588] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.855729] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.855869] pci 0000:02:00.0: [1814:5390] type 00 class 0x028000
[    0.855890] pci 0000:02:00.0: reg 0x10: [mem 0xf7d00000-0xf7d0ffff]
[    0.856058] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.857620] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.857636] pci 0000:00:1c.1:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    0.857780] pci 0000:03:00.0: [1969:1091] type 00 class 0x020000
[    0.857810] pci 0000:03:00.0: reg 0x10: [mem 0xf7c00000-0xf7c3ffff 64bit]
[    0.857826] pci 0000:03:00.0: reg 0x18: [io  0xe000-0xe07f]
[    0.857958] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.857993] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.859606] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.859617] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.859626] pci 0000:00:1c.3:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.859700] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[    0.860353] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
[    0.860406] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 12)
[    0.860456] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 12)
[    0.860506] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 12)
[    0.860555] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.860609] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.860659] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12)
[    0.860708] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 12)
[    0.861073] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.861080] ACPI: \_SB_.PCI0: notify handler is installed
[    0.861138] Found 1 acpi root devices
[    0.861208] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[    0.861280] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.861283] vgaarb: loaded
[    0.861284] vgaarb: bridge control possible 0000:00:02.0
[    0.861333] SCSI subsystem initialized
[    0.861381] libata version 3.00 loaded.
[    0.861457] PCI: Using ACPI for IRQ routing
[    0.863023] PCI: pci_cache_line_size set to 64 bytes
[    0.863075] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.863077] e820: reserve RAM buffer [mem 0xd974c000-0xdbffffff]
[    0.863085] e820: reserve RAM buffer [mem 0xd9750000-0xdbffffff]
[    0.863092] e820: reserve RAM buffer [mem 0xd9763000-0xdbffffff]
[    0.863099] e820: reserve RAM buffer [mem 0xd9771000-0xdbffffff]
[    0.863106] e820: reserve RAM buffer [mem 0xd9d85000-0xdbffffff]
[    0.863113] e820: reserve RAM buffer [mem 0xd9d87000-0xdbffffff]
[    0.863119] e820: reserve RAM buffer [mem 0xd9d8f000-0xdbffffff]
[    0.863126] e820: reserve RAM buffer [mem 0xd9f31000-0xdbffffff]
[    0.863132] e820: reserve RAM buffer [mem 0xd9f7e000-0xdbffffff]
[    0.863138] e820: reserve RAM buffer [mem 0xd9f94000-0xdbffffff]
[    0.863144] e820: reserve RAM buffer [mem 0xd9fad000-0xdbffffff]
[    0.863149] e820: reserve RAM buffer [mem 0xd9fc1000-0xdbffffff]
[    0.863154] e820: reserve RAM buffer [mem 0xd9fc4000-0xdbffffff]
[    0.863159] e820: reserve RAM buffer [mem 0xd9fd0000-0xdbffffff]
[    0.863164] e820: reserve RAM buffer [mem 0xda001000-0xdbffffff]
[    0.863168] e820: reserve RAM buffer [mem 0xda012000-0xdbffffff]
[    0.863173] e820: reserve RAM buffer [mem 0xda049000-0xdbffffff]
[    0.863177] e820: reserve RAM buffer [mem 0xda04b000-0xdbffffff]
[    0.863180] e820: reserve RAM buffer [mem 0xda04e000-0xdbffffff]
[    0.863183] e820: reserve RAM buffer [mem 0xda067000-0xdbffffff]
[    0.863186] e820: reserve RAM buffer [mem 0xda8b3000-0xdbffffff]
[    0.863189] e820: reserve RAM buffer [mem 0xdad03000-0xdbffffff]
[    0.863191] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[    0.863192] e820: reserve RAM buffer [mem 0x11f200000-0x11fffffff]
[    0.863273] NetLabel: Initializing
[    0.863274] NetLabel:  domain hash size = 128
[    0.863275] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.863285] NetLabel:  unlabeled traffic allowed by default
[    0.863320] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.863325] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.865349] Switched to clocksource hpet
[    0.869598] pnp: PnP ACPI init
[    0.869612] ACPI: bus type PNP registered
[    0.869709] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.869713] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.869777] pnp 00:01: [dma 4]
[    0.869795] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.869812] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    0.869907] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.869945] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.869947] system 00:04: [io  0x1000-0x100f] has been reserved
[    0.869949] system 00:04: [io  0xffff] has been reserved
[    0.869951] system 00:04: [io  0xffff] has been reserved
[    0.869953] system 00:04: [io  0x0400-0x0453] could not be reserved
[    0.869955] system 00:04: [io  0x0458-0x047f] has been reserved
[    0.869957] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.869959] system 00:04: [io  0x164e-0x164f] has been reserved
[    0.869962] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.869989] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.870034] system 00:06: [io  0x0454-0x0457] has been reserved
[    0.870037] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.870078] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    0.870081] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.870105] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.870158] pnp 00:09: Plug and Play ACPI device, IDs ETD0108 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[    0.870193] pnp 00:0a: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[    0.870377] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.870379] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.870381] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.870384] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.870386] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.870388] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.870390] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.870392] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.870395] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
[    0.870397] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.870399] system 00:0b: [mem 0xdfe00000-0xdfe00fff] has been reserved
[    0.870401] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.870472] system 00:0c: [mem 0xdfe00000-0xdfe00fff] has been reserved
[    0.870475] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.870614] system 00:0d: [mem 0x20000000-0x201fffff] has been reserved
[    0.870617] system 00:0d: [mem 0x40000000-0x401fffff] has been reserved
[    0.870619] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.870649] pnp: PnP ACPI: found 14 devices
[    0.870651] ACPI: bus type PNP unregistered
[    0.876805] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.876819] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.876825] pci 0000:00:1c.1:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    0.876833] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.876837] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.876842] pci 0000:00:1c.3:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.876852] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.876854] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.876856] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.876857] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.876859] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.876861] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.876863] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[    0.876864] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[    0.876866] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[    0.876868] pci_bus 0000:00: resource 13 [mem 0xdfe00000-0xfeafffff]
[    0.876870] pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff]
[    0.876871] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.876873] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    0.876901] NET: Registered protocol family 2
[    0.877070] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[    0.877213] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.877311] TCP: Hash tables configured (established 32768 bind 32768)
[    0.877334] TCP: reno registered
[    0.877352] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.877369] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.877423] NET: Registered protocol family 1
[    0.877435] pci 0000:00:02.0: Boot video device
[    0.911521] pci 0000:03:00.0: set MSI_INTX_DISABLE_BUG flag
[    0.911526] PCI: CLS 64 bytes, default 64
[    0.911565] Trying to unpack rootfs image as initramfs...
[    1.822077] Freeing initrd memory: 13704K (ffff88007f29e000 - ffff880080000000)
[    1.822082] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.822085] software IO TLB [mem 0xd574c000-0xd974c000] (64MB) mapped at [ffff8800d574c000-ffff8800d974bfff]
[    1.822500] audit: initializing netlink socket (disabled)
[    1.822516] type=2000 audit(1388949191.156:1): initialized
[    1.845575] bounce pool size: 64 pages
[    1.845589] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.846551] zbud: loaded
[    1.846712] VFS: Disk quotas dquot_6.5.2
[    1.846746] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.847145] bio: create slab <bio-1> at 1
[    1.847262] Btrfs loaded
[    1.847268] msgmni has been set to 7669
[    1.847546] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.847575] io scheduler noop registered
[    1.847578] io scheduler deadline registered
[    1.847596] io scheduler cfq registered (default)
[    1.848036] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.848049] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.865706] Console: switching to colour frame buffer device 100x37
[    1.882879] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[    1.882886] intel_idle: MWAIT substates: 0x21120
[    1.882887] intel_idle: v0.4 model 0x2A
[    1.882888] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.882999] GHES: HEST is not enabled!
[    1.883039] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.883424] Linux agpgart interface v0.103
[    1.884468] brd: module loaded
[    1.884601] mei_me 0000:00:16.0: setting latency timer to 64
[    1.884636] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X
[    1.887805] ahci 0000:00:1f.2: version 3.0
[    1.887921] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[    1.898848] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[    1.898852] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    1.898856] ahci 0000:00:1f.2: setting latency timer to 64
[    1.901153] scsi0 : ahci
[    1.901218] scsi1 : ahci
[    1.901284] scsi2 : ahci
[    1.901349] scsi3 : ahci
[    1.901438] scsi4 : ahci
[    1.901526] scsi5 : ahci
[    1.901555] ata1: SATA max UDMA/133 abar m2048@0xf7e16000 port 0xf7e16100 irq 41
[    1.901557] ata2: DUMMY
[    1.901560] ata3: SATA max UDMA/133 abar m2048@0xf7e16000 port 0xf7e16200 irq 41
[    1.901561] ata4: DUMMY
[    1.901562] ata5: DUMMY
[    1.901563] ata6: DUMMY
[    1.901619] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.903810] i8042: Detected active multiplexing controller, rev 1.1
[    1.904742] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.904747] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.904767] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.904779] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.904793] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.904884] mousedev: PS/2 mouse device common for all mice
[    1.904978] rtc_cmos 00:05: RTC can wake from S4
[    1.905094] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.905123] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.905131] ledtrig-cpu: registered to indicate activity on CPUs
[    1.905226] TCP: cubic registered
[    1.905232] Key type dns_resolver registered
[    1.905233] mpls_gso: MPLS GSO support
[    1.905458] registered taskstats version 1
[    1.905889]   Magic number: 14:526:242
[    1.905993] rtc_cmos 00:05: setting system clock to 2014-01-05 19:13:12 UTC (1388949192)
[    1.905995] BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
[    1.906126] PM: Hibernation image not present or could not be loaded.
[    1.942030] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.205734] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.206632] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    2.206691] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.206838] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    2.206849] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.207823] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA6C0, max UDMA/133
[    2.207832] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.208875] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    2.209074] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    2.209084] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.210034] ata1.00: configured for UDMA/133
[    2.210283] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54505 GG2O PQ: 0 ANSI: 5
[    2.210404] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.210407] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.210558] sd 0:0:0:0: [sda] Write Protect is off
[    2.210561] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.210634] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.211652] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    2.211654] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.214181] ata3.00: ATAPI: HL-DT-ST DVDRAM GT70N, AS00, max UDMA/133
[    2.217498] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    2.217502] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.220044] ata3.00: configured for UDMA/133
[    2.222994] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVDRAM GT70N     AS00 PQ: 0 ANSI: 5
[    2.436400] psmouse serio4: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[    2.823368] tsc: Refined TSC clocksource calibration: 2294.787 MHz
[    2.867203]  sda: sda1 sda2 sda3
[    2.867526] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.868210] Freeing unused kernel memory: 1228K (ffffffff81cdb000 - ffffffff81e0e000)
[    2.868213] Write protecting the kernel read-only data: 12288k
[    2.872483] Freeing unused kernel memory: 1896K (ffff880001626000 - ffff880001800000)
[    2.874818] Freeing unused kernel memory: 1076K (ffff880001af3000 - ffff880001c00000)
[    2.917806] dracut: dracut-034
[    2.932737] megasas: 06.700.06.00-rc1 Sat. Aug. 31 17:00:00 PDT 2013
[    2.936093] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x361f03)
[    2.949778] psmouse serio4: elantech: Synaptics capabilities query result 0x10, 0x14, 0x0e.
[    2.955604] loop: module loaded
[    2.957155] dracut: root was mgalive:LABEL=Mageia-4-GNOME-LiveDVD, is now mgalive:/dev/disk/by-label/Mageia-4-GNOME-LiveDVD
[    2.963365] systemd-udevd[157]: starting version 208
[    2.992706] dracut: Starting plymouth daemon
[    3.018581] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input8
[    3.822949] Switched to clocksource tsc
[    4.144349] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    4.144355] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.144499] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    4.153491] ACPI: bus type USB registered
[    4.153523] usbcore: registered new interface driver usbfs
[    4.153539] usbcore: registered new interface driver hub
[    4.153586] usbcore: registered new device driver usb
[    4.158161] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.158730] ehci-pci: EHCI PCI platform driver
[    4.158897] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    4.158907] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    4.158912] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    4.158928] ehci-pci 0000:00:1a.0: debug port 2
[    4.162822] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    4.162860] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e18000
[    4.168666] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    4.168730] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    4.168734] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.168737] usb usb1: Product: EHCI Host Controller
[    4.168740] usb usb1: Manufacturer: Linux 3.12.3-desktop-1.mga4 ehci_hcd
[    4.168743] usb usb1: SerialNumber: 0000:00:1a.0
[    4.168904] hub 1-0:1.0: USB hub found
[    4.168914] hub 1-0:1.0: 2 ports detected
[    4.169182] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    4.169191] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    4.169198] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    4.169214] ehci-pci 0000:00:1d.0: debug port 2
[    4.173132] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    4.173157] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e17000
[    4.178673] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    4.178773] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    4.178779] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.178784] usb usb2: Product: EHCI Host Controller
[    4.178789] usb usb2: Manufacturer: Linux 3.12.3-desktop-1.mga4 ehci_hcd
[    4.178793] usb usb2: SerialNumber: 0000:00:1d.0
[    4.178921] hub 2-0:1.0: USB hub found
[    4.178927] hub 2-0:1.0: 2 ports detected
[    4.179181] xhci_hcd 0000:00:14.0: setting latency timer to 64
[    4.179185] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    4.179192] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    4.179290] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    4.179312] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
[    4.179376] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    4.179378] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.179380] usb usb3: Product: xHCI Host Controller
[    4.179382] usb usb3: Manufacturer: Linux 3.12.3-desktop-1.mga4 xhci_hcd
[    4.179383] usb usb3: SerialNumber: 0000:00:14.0
[    4.179465] hub 3-0:1.0: USB hub found
[    4.179475] hub 3-0:1.0: 4 ports detected
[    4.179552] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    4.179555] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    4.179589] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    4.179591] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.179593] usb usb4: Product: xHCI Host Controller
[    4.179594] usb usb4: Manufacturer: Linux 3.12.3-desktop-1.mga4 xhci_hcd
[    4.179596] usb usb4: SerialNumber: 0000:00:14.0
[    4.179685] hub 4-0:1.0: USB hub found
[    4.179696] hub 4-0:1.0: 4 ports detected
[    4.470562] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    4.585231] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    4.585234] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.585633] hub 1-1:1.0: USB hub found
[    4.585685] hub 1-1:1.0: 6 ports detected
[    4.689408] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    4.803766] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    4.803776] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.804135] hub 2-1:1.0: USB hub found
[    4.804224] hub 2-1:1.0: 6 ports detected
[    4.958425] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[    4.970289] usb 3-1: New USB device found, idVendor=1058, idProduct=070a
[    4.970299] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.970304] usb 3-1: Product: My Passport 070A
[    4.970309] usb 3-1: Manufacturer: Western Digital
[    4.970314] usb 3-1: SerialNumber: 5758563045393943434A5933
[    4.974613] usb-storage 3-1:1.0: USB Mass Storage device detected
[    4.974666] usb-storage 3-1:1.0: Quirks match for vid 1058 pid 070a: 200000
[    4.974695] scsi6 : usb-storage 3-1:1.0
[    4.974771] usbcore: registered new interface driver usb-storage
[    5.123343] usb 3-2: new full-speed USB device number 3 using xhci_hcd
[    5.138073] usb 3-2: New USB device found, idVendor=062a, idProduct=3270
[    5.138083] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.138088] usb 3-2: Product: 2.4G Wireless Mouse
[    5.138093] usb 3-2: Manufacturer: MOSART Semi.
[    5.143716] hidraw: raw HID events driver (C) Jiri Kosina
[    5.148055] usbcore: registered new interface driver usbhid
[    5.148057] usbhid: USB HID core driver
[    5.148736] input: MOSART Semi. 2.4G Wireless Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/input/input9
[    5.148810] hid-generic 0003:062A:3270.0001: input,hidraw0: USB HID v1.10 Mouse [MOSART Semi. 2.4G Wireless Mouse] on usb-0000:00:14.0-2/input0
[    5.211261] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
[    5.343492] usb 1-1.3: New USB device found, idVendor=04f2, idProduct=b354
[    5.343502] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.343507] usb 1-1.3: Product: USB2.0 HD UVC WebCam
[    5.343512] usb 1-1.3: Manufacturer: Chicony
[    5.976769] scsi 6:0:0:0: Direct-Access     WD       My Passport 070A 2003 PQ: 0 ANSI: 4
[    5.977691] scsi 6:0:0:1: Enclosure         WD       SES Device       2003 PQ: 0 ANSI: 4
[    5.977806] sd 6:0:0:0: [sdb] 487024640 512-byte logical blocks: (249 GB/232 GiB)
[    5.979242] sd 6:0:0:0: [sdb] Write Protect is off
[    5.979245] sd 6:0:0:0: [sdb] Mode Sense: 23 00 10 00
[    5.980774] sd 6:0:0:0: [sdb] No Caching mode page found
[    5.980781] sd 6:0:0:0: [sdb] Assuming drive cache: write back
[    5.984066] sd 6:0:0:0: [sdb] No Caching mode page found
[    5.984073] sd 6:0:0:0: [sdb] Assuming drive cache: write back
[    5.984460]  sdb: sdb1
[    5.988422] sd 6:0:0:0: [sdb] No Caching mode page found
[    5.988428] sd 6:0:0:0: [sdb] Assuming drive cache: write back
[    5.988434] sd 6:0:0:0: [sdb] Attached SCSI disk
[    6.241745] ISO 9660 Extensions: Microsoft Joliet Level 3
[    6.243322] ISO 9660 Extensions: RRIP_1991A
[    6.249469] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    6.313717] dracut: Mounted root filesystem overlayfs
[    6.494892] dracut: Switching root
[    6.497353] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[    7.608030] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT -SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[    7.764716] systemd[1]: Inserted module 'autofs4'
[    7.842265] NET: Registered protocol family 10
[    7.842495] systemd[1]: Inserted module 'ipv6'
[    7.861870] systemd[1]: Set hostname to <localhost>.
[    8.252730] systemd[1]: Started Replay Read-Ahead Data.
[    8.252748] systemd[1]: Starting Collect Read-Ahead Data...
[    8.254211] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    8.254264] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    8.254282] systemd[1]: Starting Login Prompts.
[    8.254339] systemd[1]: Reached target Login Prompts.
[    8.254351] systemd[1]: Starting Remote File Systems.
[    8.254383] systemd[1]: Reached target Remote File Systems.
[    8.254400] systemd[1]: Starting Delayed Shutdown Socket.
[    8.254458] systemd[1]: Listening on Delayed Shutdown Socket.
[    8.254470] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    8.254517] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    8.254538] systemd[1]: Starting Journal Socket.
[    8.254610] systemd[1]: Listening on Journal Socket.
[    8.254624] systemd[1]: Mounting RPC Pipe File System...
[    8.256294] systemd[1]: Starting Journal Service...
[    8.257840] systemd[1]: Started Journal Service.
[    8.258057] systemd[1]: Mounting Debug File System...
[    8.259179] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    8.259311] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    8.259327] systemd[1]: Starting Set default kernel console loglevel...
[    8.286099] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    8.287857] systemd[1]: Mounting POSIX Message Queue File System...
[    8.289696] systemd[1]: Mounting Huge Pages File System...
[    8.291003] systemd[1]: Starting Encrypted Volumes.
[    8.291084] systemd[1]: Reached target Encrypted Volumes.
[    8.291127] systemd[1]: Starting Software RAID Monitor Takeover...
[    8.292239] systemd[1]: Starting Swap.
[    8.292318] systemd[1]: Reached target Swap.
[    8.292339] systemd[1]: Mounting Temporary Directory...
[    8.294198] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
[    8.295374] systemd[1]: Starting udev Kernel Socket.
[    8.295551] systemd[1]: Listening on udev Kernel Socket.
[    8.295578] systemd[1]: Starting udev Control Socket.
[    8.295681] systemd[1]: Listening on udev Control Socket.
[    8.295705] systemd[1]: Starting udev Coldplug all Devices...
[    8.296953] systemd[1]: Starting Configure read-only root support...
[    8.299246] systemd[1]: Starting Import network configuration from initramfs...
[    8.301067] systemd[1]: Starting Root Slice.
[    8.301155] systemd[1]: Created slice Root Slice.
[    8.301176] systemd[1]: Starting User and Session Slice.
[    8.301294] systemd[1]: Created slice User and Session Slice.
[    8.301309] systemd[1]: Starting System Slice.
[    8.301362] systemd[1]: Created slice System Slice.
[    8.301382] systemd[1]: Starting system-getty.slice.
[    8.301484] systemd[1]: Created slice system-getty.slice.
[    8.301495] systemd[1]: Starting Slices.
[    8.301544] systemd[1]: Reached target Slices.
[    8.771697] systemd-journald[371]: Vacuuming done, freed 0 bytes
[    8.896766] RPC: Registered named UNIX socket transport module.
[    8.896770] RPC: Registered udp transport module.
[    8.896772] RPC: Registered tcp transport module.
[    8.896774] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    8.971138] systemd-udevd[419]: starting version 208
[    9.121031] vboxguest: PCI device not found, probably running on physical hardware.
[    9.454702] ACPI: Requesting acpi_cpufreq
[    9.460874] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input10
[    9.466201] ACPI: Lid Switch [LID]
[    9.466289] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input11
[    9.466297] ACPI: Sleep Button [SLPB]
[    9.466350] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input12
[    9.466355] ACPI: Power Button [PWRF]
[    9.650625] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \SMB0 1 (20130725/utaddress-251)
[    9.650635] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 2 (20130725/utaddress-251)
[    9.650640] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.663154] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.663328] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GPIS 1 (20130725/utaddress-251)
[    9.663336] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 2 (20130725/utaddress-251)
[    9.663342] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.663346] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
[    9.663351] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GP01 2 (20130725/utaddress-251)
[    9.663355] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.663357] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
[    9.663362] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GP01 2 (20130725/utaddress-251)
[    9.663366] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.663368] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    9.728314] ACPI: AC Adapter [AC0] (on-line)
[    9.729818] thermal LNXTHERM:00: registered as thermal_zone0
[    9.729822] ACPI: Thermal Zone [THRM] (62 C)
[    9.744935] wmi: Mapper loaded
[    9.783629] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28
[    9.804033] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28
[    9.804060] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x28
[    9.804078] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x28
[    9.804787] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    9.932450] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[   10.043977] pcieport 0000:00:1c.3: driver skip pci_set_master, fix it!
[   10.056711] alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [74:d0:2b:03:09:e2]
[   10.061990] SKU: Nid=0x1d sku_cfg=0x40079a2d
[   10.061994] SKU: port_connectivity=0x1
[   10.061996] SKU: enable_pcbeep=0x0
[   10.061998] SKU: check_sum=0x00000007
[   10.061999] SKU: customization=0x0000009a
[   10.062001] SKU: external_amp=0x5
[   10.062003] SKU: platform_type=0x1
[   10.062004] SKU: swap=0x0
[   10.062005] SKU: override=0x1
[   10.062507] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   10.062510]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   10.062512]    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   10.062514]    mono: mono_out=0x0
[   10.062515]    inputs:
[   10.062517]      Internal Mic=0x19
[   10.062520]      Mic=0x18
[   10.062522] realtek: No valid SSID, checking pincfg 0x40079a2d for NID 0x1d
[   10.062524] realtek: Enabling init ASM_ID=0x9a2d CODEC_ID=10ec0269
[   10.104873] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   10.105197] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   10.105461] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   10.167818] cfg80211: Calling CRDA to update world regulatory domain
[   10.238940] ACPI: Battery Slot [BAT0] (battery present)
[   10.398588] ses 6:0:0:1: Attached Enclosure device
[   10.425753] media: Linux media interface: v0.10
[   10.546940] Linux video capture interface: v2.00
[   10.565524] systemd-udevd[434]: renamed network interface eth0 to enp3s0
[   10.589431] iTCO_vendor_support: vendor-support=0
[   10.621865] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[   10.621909] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[   10.625948] asus_wmi: ASUS WMI generic driver loaded
[   10.627993] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
[   10.731798] asus_wmi: Initialization: 0x1
[   10.731853] asus_wmi: BIOS WMI version: 7.9
[   10.731916] asus_wmi: SFUN value: 0x4a0877
[   10.736105] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input16
[   10.744006] uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam (04f2:b354)
[   10.753942] pcieport 0000:00:1c.1: driver skip pci_set_master, fix it!
[   10.754099] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 1502 detected
[   10.757808] input: USB2.0 HD UVC WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input17
[   10.757956] usbcore: registered new interface driver uvcvideo
[   10.757959] USB Video Class driver (1.1.1)
[   10.760898] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5390 detected
[   10.798660] asus_wmi: Backlight controlled by ACPI video driver
[   10.800546] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   10.874332] systemd-udevd[436]: renamed network interface wlan0 to wlp2s0
[   10.874476] cfg80211: World regulatory domain updated:
[   10.874479] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   10.874482] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   10.874484] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   10.874486] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[   10.874488] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[   10.874490] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[   10.874492] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[   11.026584] cfg80211: Calling CRDA for country: US
[   11.028188] cfg80211: Regulatory domain changed to country: US
[   11.028191] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   11.028193] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[   11.028194] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
[   11.028196] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
[   11.028197] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
[   11.028199] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[   11.120494] device-mapper: uevent: version 1.0.3
[   11.120573] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
[   12.195839] systemd-journald[371]: Received request to flush runtime journal from PID 1
[   37.550206] Non-volatile memory driver v1.3
[   37.564035] vboxguest: PCI device not found, probably running on physical hardware.
[   41.415411] vboxguest: PCI device not found, probably running on physical hardware.
[   44.851939] microcode: Microcode Update Driver: v2.00 removed.
[   45.963476] alx 0000:03:00.0: irq 44 for MSI/MSI-X
[   45.963571] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   46.100458] Bluetooth: Core ver 2.16
[   46.100480] NET: Registered protocol family 31
[   46.100483] Bluetooth: HCI device and connection manager initialized
[   46.100688] Bluetooth: HCI socket layer initialized
[   46.100693] Bluetooth: L2CAP socket layer initialized
[   46.100706] Bluetooth: SCO socket layer initialized
[   46.170608] sd_festival[1284]: segfault at 2d0 ip 00007f392d4f6e81 sp 00007fffd836c1d0 error 4 in libpthread-2.18.so[7f392d4ea000+18000]
[   46.244124] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   46.244128] Bluetooth: BNEP filters: protocol multicast
[   46.244138] Bluetooth: BNEP socket layer initialized
[   46.888302] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin'
[   46.979817] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.34
[   47.061417] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   47.101387] [drm] Initialized drm 1.1.0 20060810
[   47.148216] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   47.167904] [drm] Memory usable by graphics device = 2048M
[   47.167909] checking generic (e0000000 eb000) vs hw (e0000000 10000000)
[   47.167911] fb: conflicting fb hw usage inteldrmfb vs simple - removing generic driver
[   47.167941] Console: switching to colour dummy device 80x25
[   47.167997] i915 0000:00:02.0: setting latency timer to 64
[   47.249462] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[   47.249473] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   47.249474] [drm] Driver supports precise vblank timestamp query.
[   47.249528] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   47.275694] [drm] Wrong MCH_SSKPD value: 0x16040307
[   47.275697] [drm] This can cause pipe underruns and display issues.
[   47.275699] [drm] Please upgrade your BIOS to fix this.
[   47.391268] fbcon: inteldrmfb (fb0) is primary device
[   47.391365] Console: switching to colour frame buffer device 170x48
[   47.391376] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   47.391379] i915 0000:00:02.0: registered panic notifier
[   47.412630] acpi device:33: registered as cooling_device5
[   47.416638] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   47.416700] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input18
[   47.416884] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   48.344064] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   50.881408] ip_tables: (C) 2000-2006 Netfilter Core Team
[   50.888765] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   51.914240] Netfilter messages via NETLINK v0.30.
[   51.977167] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   52.244114] xt_time: kernel timezone is -0500
[   52.341452] ctnetlink v0.93: registering with nfnetlink.
[   52.403268] ip_set: protocol 6
[   52.559826] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
[   53.272153] xt_addrtype: ipv6 does not support BROADCAST matching
[   53.545748] ipt_ULOG: ULOG is deprecated and it will be removed soon, use NFLOG instead
[   54.011109] xt_CT: No such helper "pptp"
[   54.060373] xt_CT: No such helper "snmp"
[   54.105680] xt_CT: No such helper "irc"
[   54.111162] xt_CT: No such helper "irc-0"
[   54.120905] xt_CT: No such helper "netbios-ns"
[   69.456246] systemd[1]: Created slice System Slice.
[   78.571466] fuse init (API version 7.22)
[   84.241344] systemd-readahead[369]: No pack files
[  139.763469] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[  139.834267] NET: Registered protocol family 17
[  140.101390] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[  140.721143] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[  140.773260] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[  141.485395] wlp2s0: authenticate with c8:d3:a3:32:45:14
[  141.491954] wlp2s0: send auth to c8:d3:a3:32:45:14 (try 1/3)
[  141.493522] wlp2s0: authenticated
[  141.494273] wlp2s0: associate with c8:d3:a3:32:45:14 (try 1/3)
[  141.498143] wlp2s0: RX AssocResp from c8:d3:a3:32:45:14 (capab=0xc11 status=0 aid=1)
[  141.498264] wlp2s0: associated
[  141.498283] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[  141.498899] wlp2s0: deauthenticating from c8:d3:a3:32:45:14 by local choice (reason=3)
[  141.514991] cfg80211: Calling CRDA for country: GB
[  141.515056] cfg80211: Calling CRDA to update world regulatory domain
[  141.523764] cfg80211: World regulatory domain updated:
[  141.523772] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  141.523778] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  141.523783] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  141.523787] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[  141.523792] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[  141.523796] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[  141.523800] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[  141.523834] cfg80211: Calling CRDA for country: US
[  141.527023] cfg80211: Regulatory domain changed to country: US
[  141.527026] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  141.527028] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[  141.527030] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
[  141.527032] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
[  141.527034] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
[  141.527035] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[  142.310857] wlp2s0: authenticate with c8:d3:a3:32:45:14
[  142.317132] wlp2s0: send auth to c8:d3:a3:32:45:14 (try 1/3)
[  142.318729] wlp2s0: authenticated
[  142.318831] wlp2s0: associate with c8:d3:a3:32:45:14 (try 1/3)
[  142.322854] wlp2s0: RX AssocResp from c8:d3:a3:32:45:14 (capab=0xc11 status=0 aid=1)
[  142.322940] wlp2s0: associated
[  142.323289] cfg80211: Calling CRDA for country: GB
[  142.323439] wlp2s0: deauthenticating from c8:d3:a3:32:45:14 by local choice (reason=3)
[  142.338563] cfg80211: Calling CRDA to update world regulatory domain
[  142.344080] cfg80211: World regulatory domain updated:
[  142.344089] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  142.344094] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  142.344099] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  142.344104] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[  142.344108] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[  142.344112] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[  142.344117] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[  142.344156] cfg80211: Calling CRDA for country: US
[  142.347902] cfg80211: Regulatory domain changed to country: US
[  142.347907] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  142.347911] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[  142.347915] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
[  142.347918] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
[  142.347921] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
[  142.347924] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[  143.534170] wlp2s0: authenticate with c8:d3:a3:32:45:14
[  143.540427] wlp2s0: send auth to c8:d3:a3:32:45:14 (try 1/3)
[  143.541966] wlp2s0: authenticated
[  143.542214] wlp2s0: associate with c8:d3:a3:32:45:14 (try 1/3)
[  143.546016] wlp2s0: RX AssocResp from c8:d3:a3:32:45:14 (capab=0xc11 status=0 aid=1)
[  143.546093] wlp2s0: associated
[  143.546575] cfg80211: Calling CRDA for country: GB
[  143.546642] wlp2s0: deauthenticating from c8:d3:a3:32:45:14 by local choice (reason=3)
[  143.561986] cfg80211: Calling CRDA to update world regulatory domain
[  143.567151] cfg80211: World regulatory domain updated:
[  143.567187] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  143.567198] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  143.567220] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  143.567224] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[  143.567227] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[  143.567230] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[  143.567234] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[  143.567468] cfg80211: Calling CRDA for country: US
[  143.571401] cfg80211: Regulatory domain changed to country: US
[  143.571408] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  143.571413] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[  143.571417] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
[  143.571421] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
[  143.571425] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
[  143.571429] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[  145.256348] wlp2s0: authenticate with c8:d3:a3:32:45:14
[  145.262732] wlp2s0: send auth to c8:d3:a3:32:45:14 (try 1/3)
[  145.264338] wlp2s0: authenticated
[  145.265416] wlp2s0: associate with c8:d3:a3:32:45:14 (try 1/3)
[  145.269159] wlp2s0: RX AssocResp from c8:d3:a3:32:45:14 (capab=0xc11 status=0 aid=1)
[  145.269248] wlp2s0: associated
[  145.269797] cfg80211: Calling CRDA for country: GB
[  145.270043] wlp2s0: deauthenticating from c8:d3:a3:32:45:14 by local choice (reason=3)
[  145.285405] cfg80211: Regulatory domain changed to country: GB
[  145.285415] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  145.285421] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  145.285425] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[  145.285430] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[  145.285434] cfg80211:   (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm)
[  145.285438] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[  145.286658] cfg80211: Calling CRDA to update world regulatory domain
[  145.290967] cfg80211: World regulatory domain updated:
[  145.290976] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  145.290982] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  145.290986] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  145.290991] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[  145.290995] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[  145.290999] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[  145.291003] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[  145.291042] cfg80211: Calling CRDA for country: US
[  145.295637] cfg80211: Regulatory domain changed to country: US
[  145.295646] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  145.295651] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[  145.295656] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
[  145.295661] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
[  145.295665] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
[  145.295669] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[  150.982751] wlp2s0: authenticate with c8:d3:a3:32:45:14
[  150.988557] wlp2s0: send auth to c8:d3:a3:32:45:14 (try 1/3)
[  150.990027] wlp2s0: authenticated
[  150.990481] wlp2s0: associate with c8:d3:a3:32:45:14 (try 1/3)
[  150.994237] wlp2s0: RX AssocResp from c8:d3:a3:32:45:14 (capab=0xc11 status=0 aid=1)
[  150.994334] wlp2s0: associated
[  150.994719] wlp2s0: deauthenticating from c8:d3:a3:32:45:14 by local choice (reason=3)
[  151.078263] cfg80211: Calling CRDA for country: GB
[  151.078489] cfg80211: Calling CRDA to update world regulatory domain
[  151.086213] cfg80211: World regulatory domain updated:
[  151.086220] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  151.086225] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  151.086230] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  151.086234] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[  151.086237] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[  151.086241] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[  151.086245] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[  151.086284] cfg80211: Calling CRDA for country: US
[  151.089683] cfg80211: Regulatory domain changed to country: US
[  151.089687] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  151.089692] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[  151.089695] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
[  151.089699] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
[  151.089702] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
[  151.089706] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[  161.768928] wlp2s0: authenticate with c8:d3:a3:32:45:14
[  161.775166] wlp2s0: send auth to c8:d3:a3:32:45:14 (try 1/3)
[  161.776741] wlp2s0: authenticated
[  161.776851] wlp2s0: associate with c8:d3:a3:32:45:14 (try 1/3)
[  161.780875] wlp2s0: RX AssocResp from c8:d3:a3:32:45:14 (capab=0xc11 status=0 aid=1)
[  161.780993] wlp2s0: associated
[  161.781500] cfg80211: Calling CRDA for country: GB
[  161.781592] wlp2s0: deauthenticating from c8:d3:a3:32:45:14 by local choice (reason=3)
[  161.795566] cfg80211: Calling CRDA to update world regulatory domain
[  161.800650] cfg80211: World regulatory domain updated:
[  161.800658] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  161.800664] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  161.800669] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  161.800674] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[  161.800678] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[  161.800682] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[  161.800686] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[  161.800725] cfg80211: Calling CRDA for country: US
[  161.805196] cfg80211: Regulatory domain changed to country: US
[  161.805205] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  161.805210] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[  161.805215] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
[  161.805219] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
[  161.805223] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
[  161.805228] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
Mageia6 x86_64 Lxqt
Intel Core i5-3570 CPU @ 3.40GHz ‖ RAM 7892 MiB ‖ ASRock Z77 Extreme4-M
nVidia GK104 [GeForce GTX 760] [10de:1187] {nvidia}
eth0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)

Άβαταρ μέλους
dglent
Δημοσιεύσεις: 925
Εγγραφή: Τετ Ιουν 01, 2011 05:42 am
Τοποθεσία: Γαλλία

Re: Πρόβλημα με εγκατασταση mageia σε laptop

Δημοσίευση από dglent » Κυρ Ιαν 05, 2014 21:36 pm

Δεν ξερω αν έιναισφαλμα αυτό:
wlp2s0: deauthenticating from c8:d3:a3:32:45:14 by local

Δοκιμασε να βαλεις Ελλάδα ως κανονιστικό δικτύου ή δοκιμασε και με ξεκλειδωτο wifi να δεις αν συνδέεται

Άβαταρ μέλους
airmaik
Δημοσιεύσεις: 636
Εγγραφή: Τρί Ιουν 07, 2011 16:44 pm

Re: Πρόβλημα με εγκατασταση mageia σε laptop

Δημοσίευση από airmaik » Κυρ Ιαν 05, 2014 23:50 pm

dglent έγραψε:Δεν ξερω αν έιναισφαλμα αυτό:
wlp2s0: deauthenticating from c8:d3:a3:32:45:14 by local

Δοκιμασε να βαλεις Ελλάδα ως κανονιστικό δικτύου ή δοκιμασε και με ξεκλειδωτο wifi να δεις αν συνδέεται
μήπως το βγάζει αυτο διότι είμαι στα Σκόπια εκει μένω λόγω δουλειάς!!!

να δοκιμάσω με άλλο δίκτυο εννοείς?

στο debian με wicd μου βγαζει αυτο

Κώδικας: Επιλογή όλων

[   19.053254] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   26.741423] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   28.209292] alx 0000:03:00.0: irq 45 for MSI/MSI-X
[   28.209415] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   28.912331] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   32.122864] wlan0: authenticate with c8:d3:a3:32:45:14
[   32.130789] wlan0: send auth to c8:d3:a3:32:45:14 (try 1/3)
[   32.132380] wlan0: authenticated
[   32.134306] wlan0: associate with c8:d3:a3:32:45:14 (try 1/3)
[   32.138101] wlan0: RX AssocResp from c8:d3:a3:32:45:14 (capab=0xc11 status=0 aid=3)
[   32.138183] wlan0: associated
[   32.138195] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Mageia6 x86_64 Lxqt
Intel Core i5-3570 CPU @ 3.40GHz ‖ RAM 7892 MiB ‖ ASRock Z77 Extreme4-M
nVidia GK104 [GeForce GTX 760] [10de:1187] {nvidia}
eth0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)

Άβαταρ μέλους
dglent
Δημοσιεύσεις: 925
Εγγραφή: Τετ Ιουν 01, 2011 05:42 am
Τοποθεσία: Γαλλία

Re: Πρόβλημα με εγκατασταση mageia σε laptop

Δημοσίευση από dglent » Δευ Ιαν 06, 2014 07:37 am

Δοκίμασε να βάλεις MK στον κανονιστικό τομέα στις ρυθμίσεις του wifi, και αν δεν πετύχει δοκίμασε με ξεκλείδωτο wifi χωρίς wep/wpa προστασία
Αφού δουλεύει στο debian δες ποιος οδηγός έχει φορτωθεί στο debian και ποιος στη mageia, μήπως είναι και θέμα οδηγού
(μπορείς να βρεις χρήσιμες πληροφορίες εδω: https://wiki.archlinux.org/index.php/Wireless_Setup)

Επίσης σιγουρέψου ότι έεις εγκατεστημένους τους drivers για ralink:
ralink-firmware
rtlwifi-firmware
https://wiki.mageia.org/en/Setup_wireless_networking

Άβαταρ μέλους
airmaik
Δημοσιεύσεις: 636
Εγγραφή: Τρί Ιουν 07, 2011 16:44 pm

Re: Πρόβλημα με εγκατασταση mageia σε laptop

Δημοσίευση από airmaik » Τρί Ιαν 07, 2014 12:02 pm

τελικα έκανα την δοκιμη και δικαιώθηκα, τα ασυρματα τα βρηκε με την μια και μπηκε κατευθειαν στο δικο μου ισως να εχει καποιο προβλημα το live dvd

η mageia4 απλα ειναι πανεμορφη και συνεχιζει την πολυ καλη παραδοση

http://www.flickr.com/photos/99709873@N ... /lightbox/

http://www.flickr.com/photos/99709873@N ... /lightbox/

http://www.flickr.com/photos/99709873@N ... /lightbox/

http://www.flickr.com/photos/99709873@N ... /lightbox/
Mageia6 x86_64 Lxqt
Intel Core i5-3570 CPU @ 3.40GHz ‖ RAM 7892 MiB ‖ ASRock Z77 Extreme4-M
nVidia GK104 [GeForce GTX 760] [10de:1187] {nvidia}
eth0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)

Απάντηση

Μέλη σε σύνδεση

Μέλη σε αυτήν τη Δ. Συζήτηση: Δεν υπάρχουν εγγεγραμμένα μέλη και 1 επισκέπτης